|
|
Post by Mephiston on Jul 13, 2015 10:39:55 GMT -6
Hey I am going to be ordering some magnets from the follow site. If anyone is interested in ordering magnets please let me know. Splitting the shipping between more that two people makes it more worth it. If you have a better site also to order from let me know too. www.kjmagnetics.comMike |
|
|
|
Post by Nolan on Jul 13, 2015 16:00:19 GMT -6
I've done four or so orders with this guy on eBay and have been really happy with their service and prices. stores.ebay.com/Magnet4US |
|
|
|
Post by enternalvoid on Jul 13, 2015 19:51:58 GMT -6
I have done KJ in the past and everything was good. Need to order some for my stuff *Which reminds me* Hey Cort, what were the sizes of the magnets you were using?
|
|
|
|
Post by therat on Jul 14, 2015 8:19:36 GMT -6
I don't remember, I'll measure them when I get home. I will probably want to get in on a magnet order, too.
|
|
|
|
Post by lordzombie on Jul 14, 2015 21:43:57 GMT -6
What are you guys doing with all the magnets?
|
|
|
|
Post by enternalvoid on Jul 14, 2015 22:22:14 GMT -6
Magnetizing the bottom of bases so they can be stored on metal sheets rather than in foam
|
|
|
|
Post by therat on Jul 15, 2015 15:42:25 GMT -6
My mags are 1/4" diameter, 1/16" thick. I do not remember if I got the N42 or N52 strength. I would probably recommend going with N42 because if these are N52, less strength would be better, particularly for plastics. 1/16" thick works almost perfectly for 30mm and 40mm bases, so if you want to go with a smaller diameter that would be fine, but I recommend sticking with 1/16" thick. 1/4" diameter is probably not necessary.
|
|
|
|
Post by enternalvoid on Jul 18, 2015 16:26:17 GMT -6
Seeing we did not see you this weekend Mike, I had my order with me, I will put it here.
If I could get:
D21 (10 for 1.10) x 2 packs = 2.20
D31 (0.16) x20 = 3.20
D41 (0.23) x20 = 4.60
Total = 10.00
That should let me test out pretty well with my models for what I will want in the future for what.
|
|
